Clevis Pins

Technifast stock Clevis Pins to ISO 2341B (DIN 1444B), which has a cross-drilled hole intended for use with a Cotter Pins or Retaining Pins (R-Clip). Also available are ISO 2341 Clevis Pin, with grooves for Circlips to DIN 471.

Clevis Pins are made to the following standards: -

Clevis Pins ISO 2341A; Same as ISO 2341B, but without hole


Clevis Pins ISO 2341B; (Stocked)

Clevis Pin


Clevis Pins ISO 2341 - Circlip; for Circlips to DIN 471

Clevis Pins ISO 2340A; Headless, without hole
Clevis Pins ISO 2340B; Headless with cross-drilled hole each end

Clevis Pin DIN 1433; Headless, with or without holes
Clevis Pin DIN 1434; Similar to ISO 2341 but with larger diameter head
Clevis Pin DIN 1435; Similar to ISO 2341 but with larger diameter head
Clevis Pin DIN 1436; Similar to ISO 2341 but with larger diameter head
Clevis Pin DIN 1443; Same as ISO 2340
Clevis Pin DIN 1444; Same as ISO 2341

Clevis Pin BS 5894; obsolete, replaced by ISO 2341

Clevis Pins are available in: -

Mild Steel, Zinc Plated
Stainless A2 (303)
Stainless A4 (316)

Go to our technical pages for more information about tolerances/materials/etc

A Clevis Pin can also be made in inch sizes and to non-standard dimensions.


Please contact our sales department for a quote on Clevis Pins, or more information